主要功能特點：
用于測量汽車排放廢氣中的HC、CO、CO2及O2氣體濃度，自動計算顯示空燃比λ，可對發動機燃燒性

能及排放污染情況進行綜合檢測。采用國外技術，進口關鍵零部件組裝而成。具有高亮度數碼顯示，自

動校零，自動數據線性化處理，氣路阻塞時自動報警，故障時自動診斷所在單元，打印測試之日期、時間功

能，配內置打印機（或藍牙、RS232、模擬接口），可進行自由怠速和雙怠速測量，具有操作方便，測

量數據準確，工作穩定可靠等特點。符合最新摩托車GB 14621-2011的測試要求。

主要技術參數：
測量范圍    HC：0～10000×10-6（ppm）vol     CO:0～10×10-2(%)vol
CO2:0～20×10-2(%)vol                O2: 0～25×10-2(%)vol
λ:0.50～ 3.00                           COcor:0～10×10-2(%)vol
示值誤差    HC±12  ×10-6（ppm）vol(絕對誤差)或±5%(相對誤差)
CO±0.06×10-2(%)vol    (絕對誤差)或±5%(相對誤差)
CO2 ±0.5×10-2(%)vol    (絕對誤差)或±5%(相對誤差)
O2 ±0.1 ×10-2(%)vol    (絕對誤差)或±5%(相對誤差)
重 復 性     重復誤差≤±2%
穩 定 性     自動校零，量矩漂移≤±3%
分 辨 率     HC：1×10-6（ppm）vol    CO: 0.01×10-2(%)vol
CO2: 0.1×10-2(%)vol      O2: 0.01×10-2(%)vol      λ:0.01
響應時間    95%響應不大于10秒
預熱時間    8min（可預熱3min應急檢測）
輸出方式    數字直讀顯示，可附打印機打印氣體名稱，按照國家標準濃度平均值及
濃度最大值，測試時間、日期等?？筛浇涌谂c計算機聯網。
環境條件    溫度-5～50℃，相對濕度≤90%
電      源     AC100-240V 50/60Hz 或DC12V（選加電源逆變器）消耗功率40VA
外形尺寸    420mm(長)×310mm(寬)×170mm(高)
重      量     約9kg

Main Features:

Used to measure vehicle emissions of HC, CO, CO2 and O2 gas concentrations, automatic calculation

shows that air-fuel ratio λ, can be the engine combustion performance and emissions of pollution in

a comprehensive test. Use of advanced foreign technology, import the key components assembled.

With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm

when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time

functions, with built-in printer (or the analog output interface or Bluetooth / RS232 interface), can be freely idling and dual idling measure, with convenient operation,

accurate measurement data, work stable and reliable characteristics.

Main technical parameters:

Measuring range:HC: 0~10000×10^-6(ppm)vol,CO: 0~10×10^-2(%)vol )

CO2: 0~20×10^-2(%)vol, O2: 0~25×10^-2(%)vol

R.M.P: 0~9999r.m.p OIL TEMP:0~150℃

Lambda: 0.50~3.00 COcor:0~10×10^-2(%)vol

Indicating error:HC±12×10^-6(ppm)vol ( absolute error ) or±5% ( relative error )

CO±0.06×10^-2(%)vol ( absolute error ) or±5% ( relative error )

CO2±0.5×10^-2(%)vol ( absolute error ) or±5% ( relative error )

O2±0.1×10^-2(%)vol ( absolute error ) or±5% ( relative error )

Stability:moment drift≤±3%

Repeatability ≤±2%

Resolution: HC:1×10^-6(ppm)vol, CO: 0.01×10^-2(%)vol

CO2: 0.1×10^-2(%)vol, O2: 0.01×10^-2(%)vol, Lambda: 0.01

R.P.M:10r.p.m, OIL TEMP:0.1℃

Response time: 95% response is not more than 10 seconds

Preheating time: 8min ( preheating 3min emergency detection )

Output mode: digital direct reading, gases can be attached printer name, in accordance with national standards

and the average concentration of the maximum value, test time, date. Can interface with computer networking.

And-use temperature: -5~50°C, Relative humidity: ≤90%

Power: AC100~240V 50/60Hz or DC12V( Add power inverter)

Power consumption: 40VA

Dimension: 420 (L )×310(W)×170(H)mm

Weight: 9kg