便攜式高精度 汽車排氣分析儀：

HPC518：

簡介：

HPC518是三種電源都可直接供電使用的便攜式汽車排氣分析儀。特別適用于環保監測、交通部門進行路檢抽檢；檢測部門、工礦企業野外及偏僻無電源處均可使用。有隨時性、即時性、不受任何地點及有無電源等均可檢測的優點。儀器為*精制鋁合金拉桿箱外殼，攜帶方便，操作簡單。

主要功能特點：

◆大屏幕液晶顯示，中文(或英文)菜單；

◆采用德國進口紅外線探測器、O2及NOX傳感器，不怕震動，穩定性好，精度高；

◆用于測量CO、HC、CO₂、O₂、NOX濃度及 λ值、CO_cor、轉速、油溫、流量、壓力；

◆具有單怠速、雙怠速、通用測量功能；

◆可測量以汽油、LPG、CNG、酒精及柴油等作燃料的車輛；

◆滿足新國標GB18285-2018及美國BAR－97標準，符合ISO3930或OIMLR99 00級精度；

◆具有自動調零，自動清洗，自動溫度補償、壓力補償；

◆具有HC殘留測量、流量監控、氣路泄漏檢查；

◆機內有自我診斷功能，故障時會有提示，直到故障排除方可繼續測量；

◆具備轉速、油溫測量，內置打印機或藍牙、RS232接口；

◆可車牌號輸入及500組數據存貯，備查功能，時鐘顯示；

◆配220V充電器，車載點煙器供電插頭和電瓶鱷魚夾；

◆內置高容量鋰電池充電可供連續工作8小時。

技術參數：

1、測量范圍： HC：0～10000×10^-6（ppm）vol（汽油作燃料，正已烷當量）

或C3H8 0-20000×10^-6（ppm）vol（液化氣作燃料，丙烷當量）

CO:0～10×10^-2(%)vol CO₂:0～20×10^-2(%)vol

O₂: 0～25×10^-2(%)vol NO_x:0～5000×10^-6（ppm）vol

λ:0.50～3.00 CO_cor:0～10×10^-2(%)vol

R.M.P：0-9999r.m.p OIL TEMP:0-150℃

2、示值誤差：

氣體種類	量程	示值允許誤差
		絕對誤差	相對誤差
HC	（0～2000）×10-6	±4×10-6（ppm）vol	±3%
	（2001～5000×10-6	——	±5%
	（5001～10000）×10-6	——	±10%
CO	（0.00～10.00）×10-2	0.02×10-2(%)vol	±3%
	（10.01～14.00）×10-2	——	±5%
CO2	（0.0～16.0）×10-2	0.3×10-2(%)vol	±3%
	（16.1～20.0）×10-2	——	±5%
O2	（0～25）×10-2	0.1×10-2(%)vol	±5%
NOX	（0～5000）×10-6	±25×10-6（ppm）vol	±4%

3、穩定性：自動校零，量矩漂移≤±3%

4、重復性：重復誤差≤±2%

5、分辨率：HC：1×10^-6（ppm）vol CO: 0.01×10^-2(%)vol CO₂: 0.1×10^-2(%)vol

O₂: 0.01×10^-2(%)vol NO_x:1×10^-6（ppm）vol λ:0.01

R.P.M為10r.p.m OIL TEMP為0.1℃

6、響應時間：95%響應不大于10秒

7、預熱時間：3min（可預熱1min應急檢測）

8、使用環境條件：溫度-5～50℃，相對濕度≤90%

9、氧傳感器與氮氧傳感器在空氣中的壽命分別為兩年和14個月。（超過期限準確度會下降）

10、電源：●內置電池直接供電使用

●通過車載DC12V直接供電使用（不需加任何電源逆變器）

●AC100～240V 50/60HZ 供電使用

11、消耗功率：<50VA

12、外形尺寸：520mm(長)×360mm(寬)×250mm(高)

Introduction:

HPC518 is a portable automobile exhaust analyzer the world's first three power can be supplied directly use. Especially suitable for inspection sampling in environmental monitoring, public security, traffic departments; inspection department, industrial and mining enterprises in wild and lonely without power supply can be used. At any time, without any place and there is no power can detect the advantages. Apparatus for refining aluminium alloy rod box shell, convenient carrying, simple operation.

Main features:

◆ large-screen LCD display, Chinese menu (or English);

◆ used in Germany imported infrared detector, O2 and NOX sensor, shock resistance, good stability, high accuracy;

◆ for measuring CO, HC, CO2, O2, NOX concentration and the lambda value, COcor, speed, oil temperature, flow rate, pressure;

◆ with single, double idle idle, universal measuring function;

◆ measurements to gasoline, LPG, CNG, ethanol and diesel as fuel vehicle;

◆ according to the new national standard and the United States of America BAR97 development standard, with ISO3930 or OIMLR99 00 grade precision;

◆ with automatic zero adjustment, automatic cleaning, automatic temperature compensation, pressure compensation;

◆ with HC residual measurement, flow control, gas leak check;

◆ machine a self-diagnosis, fault when prompted, until the troubleshooting can continue measurement;

◆ with speed, oil temperature measurement, built-in printer or Bluetooth / RS232 interface ;

◆ the license plate number input and 500 groups of data storage, reference function, the clock display;

◆ with 220V charger, car cigarette lighter power supply plug and battery holder;

The built-in rechargeable battery can work continuously for 8 hours.

Main technical parameters:

Measuring range:HC: 0~10000×10^-6(ppm)vol,CO: 0~15×10^-2(%)vol )

CO2: 0~20×10^-2(%)vol, O2: 0~25×10^-2(%)vol

NOx: 0~5000×10^-6(ppm)vol,

R.M.P: 0~9999r.m.p OIL TEMP:0~150℃

Lambda: 0.50~3.00 COcor:0~10×10^-2(%)vol

Indicating error:

Gas species	range	Indicative permissible error
		absolute error	relative error
HC	（0～2000）×10-6	±4×10-6（ppm）vol	±3%
	（2001～5000×10-6	——	±5%
	（5001～10000）×10-6	——	±10%
CO	（0.00～10.00）×10-2	0.02×10-2(%)vol	±3%
	（10.01～14.00）×10-2	——	±5%
CO2	（0.0～16.0）×10-2	0.3×10-2(%)vol	±3%
	（16.1～20.0）×10-2	——	±5%
O2	（0～25）×10-2	0.1×10-2(%)vol	±5%
NOX	（0～5000）×10-6	±25×10-6（ppm）vol	±4%

Stability:moment drift≤±3%

Repeatability ≤±2%

Resolution: HC:1×10^-6(ppm)vol, CO: 0.01×10^-2(%)vol,CO2: 0.1×10^-2(%)vol,

O2: 0.01×10^-2(%)vol, NOx: 1×10^-6(ppm)vol, Lambda: 0.01,

R.P.M:10r.p.m, OIL TEMP:0.1℃

Response time: 95% response is not more than 10 seconds

Preheating time: 8min ( preheating 3min emergency detection )

And-use temperature: -5~50°C, Relative humidity: ≤90%

Life of O2 sensor and NOX sensor in the air for two years and 14 months, respectively. (over the period decreased accuracy)

Power supply:

● direct power supply with built-in battery

● Direct power supply vehicle DC12V use (without any power inverter)

●The AC100~240V 50/60HZ supply

Power consumption: 50VA

Dimension: 520 (L )×360(W)×250(H)mm